Joint Sealant

The moisture cured systems previously used for joint sealing and crack repair were unacceptable. Ureathanes were too soft and did not prevent joint facia spalling with forklift traffic. Epoxy systems easily withstood the forklift traffic but debonded when slight slab deflection occurred, both systems took many hours to cure!

The Solution

Our joint sealants solve the problems of the past by combining high elongation (500%), a shore hardness of 80A and rapid curing (1hour). The combination of these physical properties allow SL/75 to both withstand forklift tire impacting and prevent debonding when minimal slab deflection occurs.

 

VTI Joint Filler/Sealant

• High Elongation 500%
• Shore Hardness of 80A
• Rapid Curing (1 hour)
• Odorless
• VOC Compliant